KT-GX 20W laser marking/engraving machine for bearing

Working principle of the laser processing

Laser marking is to use high energy condensed laser beam to illuminate on the surface of the work piece, to let the surface layer of the material quickly gasified, or to change the color of it, so that the deep layer is shown, or it cause chemical changes, burn part of it to marking on it thus the graph or characters can be displayed.

Features of this machine:

1. Adopts of the Germen third generation solid fiber laser equipment, conversion rate of the electro to light can reach 60%, excellent beam quality M2<1.4
2. This beam quality creates supper précised marking result.
3. adopts of Germen original SCANLAB scanning head, high marking speed, which is four times faster than the normal CO2 and KT semi-conductor marking machine, thus to save the costly human resource.
4. fully wind cooling, no material consumption and five year free maintenance, low using cost, power consumption is small, no water condensing system, export by soft fiber cable, easy and energy saving, the entire machine power is only 500W, to compare with YAG and the normal semi-conductor laser marking machine, this machine can save about twenty to thirty thousand RMB per year.
5. Compact modular design is easy for maintenance; small machine body also can save the precious room for workshops.
6. environmental protection marking, the color will not vanish forever, comply with the RoHS standard.

7.  

8. Function of the software

   1. Can adopt of various file formations, such as: BMP,JPG,DXF,PLT,AI and etc.
   2. automatically create deferent serial numbers: production dates, 1and 2 dimension codes.
   3. support of flying marking
   4. support rotational marking;
   5. support large area XX platform for auto divide marking.

Feature of the fiber laser marking machine

Model

KT-GQ10

KT-GQ 20

Laser export power

≤10W

≤20W

Laser wave length

1064nm

1064nm

Beam qualityM2

<1.4

<1.8

Laser Q adjusting frequency

20kHz~100kHz

20kHz~200kHz

Standard scribe scope

110mm×110mm

110mm×110mm

Selective scribe scope

70mm×70mm/150mm×150mm

70mm×70mm/150mm×150mm

Engraving depth

≤1mm

≤2mm

Machine install power

500W

800W

Minimum line width

0.01mm

0.01mm

Repeating precision

±0.0001mm

±0.0001mm

Power supply

Single phase AC 90-250V/50Hz 5A

Single phase AC 90-250V/50Hz 10A

Inscribing speed

500 characters/s (Single line Roman font height 1mm)

800 characters/s (Single line Roman font height 1mm)

System dimension(L×W×H)

Main machine system dimension

800mm×680mm×1200mm

800mm×680mm×1200mm

Cooling system

Wind cooling

Wind cooling